Systematically quantifying the dynamic characteristics of PM2.5 in multiple indoor environments in a plateau city: Implication for internal contribution.

People generally spend most of their time indoors, making a comprehensive evaluation of air pollution characteristics in various indoor microenvironments of great significance for accurate exposure estimation. In this study, field measurements were conducted in Kunming City, Southwest China, using real-time PM2.5 sensors to characterize indoor PM2.5 in ten different microenvironments including three restaurants, four public places, and three household settings. Results showed that the daily average PM2.5 concentrations in restaurants, public spaces, and households were 78.4 ± 24.3, 20.1 ± 6.6, and 18.0 ± 4.3 µg/m3, respectively. The highest levels of indoor PM2.5 in restaurants were owing to strong internal emissions from cooking activities. Dynamic changes showed that indoor PM2.5 levels increased during business time in restaurants and public places, and cooking time in residential kitchens. Compared with public places, restaurants generally exhibit more rapid increases in indoor PM2.5 due to cooking activities, which can elevate indoor PM2.5 to high levels (5.1 times higher than the baseline) in a short time. Furthermore, indoor PM2.5 in restaurants were dominated by internal emissions, while outdoor penetration contributed mostly to indoor PM2.5 in public places and household settings. Results from this study revealed large variations in indoor PM2.5 in different microenvironments, and suggested site-specific measures for indoor PM2.5 pollution alleviation.

Global supply chains amplify economic costs of future extreme heat risk.

Evidence shows a continuing increase in the frequency and severity of global heatwaves1,2, raising concerns about the future impacts of climate change and the associated socioeconomic costs3,4. Here we develop a disaster footprint analytical framework by integrating climate, epidemiological and hybrid input-output and computable general equilibrium global trade models to estimate the midcentury socioeconomic impacts of heat stress. We consider health costs related to heat exposure, the value of heat-induced labour productivity loss and indirect losses due to economic disruptions cascading through supply chains. Here we show that the global annual incremental gross domestic product loss increases exponentially from 0.03 ± 0.01 (SSP 245)-0.05 ± 0.03 (SSP 585) percentage points during 2030-2040 to 0.05 ± 0.01-0.15 ± 0.04 percentage points during 2050-2060. By 2060, the expected global economic losses reach a total of 0.6-4.6% with losses attributed to health loss (37-45%), labour productivity loss (18-37%) and indirect loss (12-43%) under different shared socioeconomic pathways. Small- and medium-sized developing countries suffer disproportionately from higher health loss in South-Central Africa (2.1 to 4.0 times above global average) and labour productivity loss in West Africa and Southeast Asia (2.0-3.3 times above global average). The supply-chain disruption effects are much more widespread with strong hit to those manufacturing-heavy countries such as China and the USA, leading to soaring economic losses of 2.7 ± 0.7% and 1.8 ± 0.5%, respectively.

Pollution Characteristics and Health Risks of Polycyclic Aromatic Compounds (PACs) in Soils of a Coking Plant.

Coke production is an important source of environmental polycyclic aromatic compounds (PACs), including parent polycyclic aromatic hydrocarbons (PAHs) and their derivatives. The focus near coking plants has primarily been on parent-PAH contamination, with less attention given to highly toxic derivatives. In this study, soil samples were collected from both within and outside of a coking plant. The concentrations of parent-PAHs and their derivatives, including methylated-PAHs, oxygenated-PAHs, and nitrated-PAHs, were examined. Spatial interpolation was employed to determine their spatial distribution patterns. Methods for identifying potential sources and conducting incremental lifetime cancer risk analysis were used. This could achieve a comprehensive understanding of the status of PAC pollution and the associated health risks caused by coke production. The concentrations of total PACs inside the plant ranged from 7.4 to 115.8 mg/kg, higher than those outside (in the range of 0.2 to 65.7 mg/kg). The spatial distribution of parent-PAH concentration and their derivatives consistently decreased with increasing distance from the plant. A significant positive correlation (p < 0.05) among parent-PAHs and their derivatives was observed, indicating relatively consistent sources. Based on diagnostic ratios, the potential emission sources of soil PACs could be attributed to coal combustion and vehicle emissions, while principal component analysis-multiple linear regression further indicated that primary emissions and secondary formation jointly influenced the PAC content, accounting for 60.4% and 39.6%, respectively. The exposure risk of soil PACs was dominated by 16 priority control PAHs; the non-priority PAHs' contribution to the exposure risk was only 6.4%.

Polycyclic aromatic compounds (PACs) in industrial soils from northwestern of China: occurrence, distribution, exposure risk, and implications on risk-based controls.

Some Polycyclic Aromatic Compounds (PACs) such as nitrated-PAHs (NPAHs), oxygenated-PAHs (OPAHs) and methyl-PAHs (MPAHs) have attracted significant concern due to derivatives have greater potential to be more toxic at low environmental concentrations compared to their PPAHs, particularly in petrochemical industrial region and its surrounding areas surface soils in China. Hence, this article provides an insight into the fate, sources, impacts, and relevance to the external environment of PAH-derivatives based on important emissions source. Moreover, prospective health risk due to their exposure has also been discussed. In this study, the concentration (10-3 ng/g) of Æ©18PPAHs, Æ©11MPAHs, Æ©12NPAHs, and Æ©4OPAHs in the park were 9.67 ± 1.40, 3.24 ± 0.54, 0.03 ± 0.02 and 0.19 ± 0.65, respectively, which were 4.47, 3.89, 2.04 and 1.17 times than of them surrounding the region. A decreasing trend of the low molecular weight (2-4Rings) contribution to the total amount of PAHs, while the fraction of high molecular weight (5-6Rings) species showed the opposite trend. According to the principal component analysis (PCA) and diagnostic ratios indicated PAHs in the soil samples have mixed sources from industrial activities, solid fuel combustion, and heavy traffic. Despite the high concentrations of MPAHs and OPAHs, the toxicity equivalency quotients (TEQs) of them were not calculated due to the lack of toxic equivalent factors (TEF), thus current studies on PAH and derivatives could have underestimated their exposure risks. The quality and sustainable management of soils are crucial for human health and sustainable development, while there is lack of public awareness of the severe issue of soil pollution. It is recommended to conduct more intensive monitoring and regional assessments in the future.

Structural Design of Single-Atom Catalysts for Enhancing Petrochemical Catalytic Reaction Process.

Petroleum, as the "lifeblood" of industrial development, is the important energy source and raw material. The selective transformation of petroleum into high-end chemicals is of great significance, but still exists enormous challenges. Single-atom catalysts (SACs) with 100% atom utilization and homogeneous active sites, promise a broad application in petrochemical processes. Herein, the research systematically summarizes the recent research progress of SACs in petrochemical catalytic reaction, proposes the role of structural design of SACs in enhancing catalytic performance, elucidates the catalytic reaction mechanisms of SACs in the conversion of petrochemical processes, and reveals the high activity origins of SACs at the atomic scale. Finally, the key challenges are summarized and an outlook on the design, identification of active sites, and the appropriate application of artificial intelligence technology is provided for achieving scale-up application of SACs in petrochemical process.

Identification of the single and combined acute toxicity of Cr and Ni with Heterocypris sp. and the quantitative structure-activity relationship (QSAR) model.

Mining wastewater with heavy metals poses a serious threat to the ecological environment. However, the acute single and combined ecological effects of heavy metals, such as chromium (Cr) and nickel (Ni), on freshwater ostracods, and the development of relevant prediction models, remain poorly understood. In this study, Heterocypris sp. was chosen to investigate the single and combined acute toxicity of Cr and Ni. Then, the quantitative structure-activity relationship (QSAR) model was used to predict the combined toxicity of Cr and Ni. The single acute toxicity experiments revealed high toxicity for both Cr and Ni. In addition, Cr exhibited greater toxicity compared to Ni, as evidenced by its lower 96-hour half-lethal concentration (LC50) of 1.07 mg/L compared to 4.7 mg/L for Ni. Furthermore, the combined acute toxicity experiments showed that the toxicity of Cr-Ni was higher than Ni but lower than Cr. Compared with the concentration addition (CA) and independent action (IA) models, the predicted results of the QSAR model were more consistent with the experimental results for the Cr-Ni combined acute toxicity. So, the high accuracy of QSAR model identified its feasibility to predict the toxicity of heavy metal pollutants in mining wastewater.

Health burden from food systems is highly unequal across income groups.

Food consumption contributes to the degradation of air quality in regions where food is produced, creating a contrast between the health burden caused by a specific population through its food consumption and that faced by this same population as a consequence of food production activities. Here we explore this inequality within China's food system by linking air-pollution-related health burden from production to consumption, at high levels of spatial and sectorial granularity. We find that low-income groups bear a 70% higher air-pollution-related health burden from food production than from food consumption, while high-income groups benefit from a 29% lower health burden relative to their food consumption. This discrepancy largely stems from a concentration of low-income residents in food production areas, exposed to higher emissions from agriculture. Comprehensive interventions targeting both production and consumption sides can effectively reduce health damages and concurrently mitigate associated inequalities, while singular interventions exhibit limited efficacy.

Convolutional Neural Networks Facilitate Process Understanding of Megacity Ozone Temporal Variability.

Ozone pollution is profoundly modulated by meteorological features such as temperature, air pressure, wind, and humidity. While many studies have developed empirical models to elucidate the effects of meteorology on ozone variability, they predominantly focus on local weather conditions, overlooking the influences from high-altitude and broader regional meteorological patterns. Here, we employ convolutional neural networks (CNNs), a technique typically applied to image recognition, to investigate the influence of three-dimensional spatial variations in meteorological fields on the daily, seasonal, and interannual dynamics of ozone in Shenzhen, a major coastal urban center in China. Our optimized CNNs model, covering a 13° × 13° spatial domain, effectively explains over 70% of daily ozone variability, outperforming alternative empirical approaches by 7 to 62%. Model interpretations reveal the crucial roles of 2-m temperature and humidity as primary drivers, contributing 16% and 15% to daily ozone fluctuations, respectively. Regional wind fields account for up to 40% of ozone changes during the episodes. CNNs successfully replicate observed ozone temporal patterns, attributing -5-6 µg·m-3 of interannual ozone variability to weather anomalies. Our interpretable CNNs framework enables quantitative attribution of historical ozone fluctuations to nonlinear meteorological effects across spatiotemporal scales, offering vital process-based insights for managing megacity air quality amidst changing climate regimes.

Diagnostic signatures and immune cell infiltration characteristics in anti-GABABR encephalitis.

PURPOSE: Anti-gamma-aminobutyric acid B receptor (GABABR) encephalitis is an uncommon form of autoimmune encephalitis associated with a poor prognosis and a high fatality rate. We aim to find diagnostic markers for anti- GABABR encephalitis as well as the effects of immune cell infiltration on this pathology. METHODS: For quantitative proteomic analysis, isobaric tags for relative and absolute quantitation were used in conjunction with LC-MS/MS analysis. To conduct functional correlation analyses, differentially expressed proteins (DEPs) were identified. Following that, we used bioinformatics analysis to screen for and determine the diagnostic signatures of anti- GABABR encephalitis. ROC curves were used to evaluate the diagnostic values. To assess the inflammatory status of anti- GABABR encephalitis, we used cell-type identification by estimating relative subsets of the RNA transcript (CIBERSORT) and explored the link between diagnostic markers and infiltrating immune cells. RESULTS: Overall, 108 robust DEPs (47 upregulated and 61 downregulated) were identified, of which 11 were immune related. The most impressively enriched pathways were complemented and coagulation cascades, actin cytoskeleton regulation, and cholesterol metabolism; GSEA revealed that the enriched pathways were considerably differentially connected to immune modulation. Eleven immune-related DEPs were chosen for further investigation. We developed a novel diagnostic model based on CSF1R and AZGP1 serum levels using ROC analysis (area under the ROC curve = 1). M1 macrophages and activated natural killer cells are likely to play a role in course of anti- GABABR encephalitis. CONCLUSION: We identified CSF1R and AZGP1 are possible anti-GABABR encephalitis diagnostic indicators, and immune cell infiltration may have a significant impact on the development and occurrence of anti- GABABR encephalitis.

Fertilizer management for global ammonia emission reduction.

Crop production is a large source of atmospheric ammonia (NH3), which poses risks to air quality, human health and ecosystems1-5. However, estimating global NH3 emissions from croplands is subject to uncertainties because of data limitations, thereby limiting the accurate identification of mitigation options and efficacy4,5. Here we develop a machine learning model for generating crop-specific and spatially explicit NH3 emission factors globally (5-arcmin resolution) based on a compiled dataset of field observations. We show that global NH3 emissions from rice, wheat and maize fields in 2018 were 4.3 ± 1.0 Tg N yr-1, lower than previous estimates that did not fully consider fertilizer management practices6-9. Furthermore, spatially optimizing fertilizer management, as guided by the machine learning model, has the potential to reduce the NH3 emissions by about 38% (1.6 ± 0.4 Tg N yr-1) without altering total fertilizer nitrogen inputs. Specifically, we estimate potential NH3 emissions reductions of 47% (44-56%) for rice, 27% (24-28%) for maize and 26% (20-28%) for wheat cultivation, respectively. Under future climate change scenarios, we estimate that NH3 emissions could increase by 4.0 ± 2.7% under SSP1-2.6 and 5.5 ± 5.7% under SSP5-8.5 by 2030-2060. However, targeted fertilizer management has the potential to mitigate these increases.

Pollution characteristics and affecting factors of phthalate esters in agricultural soils in mainland China.

Phthalate esters (PAEs), the most commonly produced and used plasticizers, are widely used in plastic products and agroecosystems, posing risks to agricultural products and human health. However, current research on PAE pollution characteristics in agricultural soils in China is not comprehensive; affecting factors and relationships with microplastics and plasticizer organophosphate esters have not been sufficiently considered. In this study, farmland soil samples were collected with field questionnaires on a national scale across mainland China. The results showed that the detection rate of PAEs was 100% and the Σ16PAEs concentrations were 23.5 - 903 µg/kg. The level of PAEs was highest in the greenhouse, and significantly higher than that in mulched farmland (p < 0.05). The PAE concentration in northwestern China was the lowest among different physical geographic zones. PAEs in farmlands posed a low cancer risk to Chinese people. PAE pollution in farmlands was significantly (p < 0.05) affected by agronomic measures (such as disposal method), environmental factors, and socioeconomic factors. Overall, PAEs were significantly and positively correlated (p < 0.05) with organophosphate esters but not with microplastics. This study aims to provide scientific data for relevant prevention and control policies, as well as actionable recommendations for pollution reduction.

Characteristics of dissolved organic matter (DOM) in Chinese farmland soils under different climate zone types: A molecular perspective.

Interactions between dissolved organic matter (DOM) and surrounding environments are highly complex. Understanding DOM at the molecular level can contribute to the management of soil pollution and safeguarding agricultural fields. Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) has enabled a molecular-level understanding of DOM. Accordingly, in this study, we investigated soil samples from 27 different regions of mainland China with various soil types and climatic characteristics. Based on the geographical features of the four typical climatic zones in mainland China (temperate monsoon, temperate continental, subtropical monsoon, and Qinghai-Tibet Plateau climates), we employed high-resolution mass spectrometry to determine the molecular diversity of DOM under different climatic conditions. The results indicated that lignin and tannin-like substances were the most active categories of DOM in the soils. Collectively, the composition and unsaturation of DOM molecules are influenced by sunlight, precipitation, temperature, and human activity. All climatic regions contained a substantial number of characteristic molecules, with CHO and CHON constituting over 80%, and DOM containing nitrogen and sulfur was relatively more abundant in the monsoon regions. The complex composition of DOM incorporates various active functional groups, such as -NO2 and -ONO2. Furthermore, soil DOM in the monsoon regions showed higher unsaturation and facilitated various (bio) biochemical reactions in the soil.

Benzenepoly(carboxylic acid)s as Exclusive Intrinsic Markers to Assess Riverine Export of Dissolved Black Carbon.

Landscape fires annually generate large quantities of black carbon. The water-soluble fraction of black carbon (i.e., dissolved black carbon/DBC) is an important constituent of the dissolved organic carbon (DOC) pool, playing a crucial role in the global budget of refractory carbon and climate change. A key challenge in constraining the flux and fate of riverine DBC is to develop targeted and accurate quantification methods. Herein, we report that benzenepentacarboxylic acid (B5CA) intrinsically present in DBC can be used as an exclusive and holistic marker (representing both condensed aromatics and less-/nonaromatic fractions) for DBC quantification. B5CA was universally detected in water extractions of biochar and fire-affected soils with relatively large abundance but not produced by nonthermogenic processes. It has good mobility in the environment as it is not readily precipitated by cations or adsorbed by common geosorbents. B5CA also represents the recalcitrant components of DBC with excellent stability against photodegradation and biodegradation. Applying B5CA as the DBC marker in surface waters of the Changjiang River (i.e., the third largest river in the world), we calculate the DBC concentration in the downstream Changjiang River to be 4.8 ± 5.5% of the DOC flux. Our work provides a simple and reliable approach for the accurate quantification and source tracking of DBC in the soil and aquatic carbon pools.

Investigation of Plant-Level Volatile Organic Compound Emissions from Chemical Industry Highlights the Importance of Differentiated Control in China.

The chemical industry is a significant source of nonmethane volatile organic compounds (NMVOCs), pivotal precursors to ambient ozone (O3), and secondary organic aerosol (SOA). Despite their importance, precise estimation of these emissions remains challenging, impeding the implementation of NMVOC controls. Here, we present the first comprehensive plant-level assessment of NMVOC emissions from the chemical industry in China, encompassing 3461 plants, 127 products, and 50 NMVOC compounds from 2010 to 2019. Our findings revealed that the chemical industry in China emitted a total of 3105 (interquartile range: 1179-8113) Gg of NMVOCs in 2019, with a few specific products accounting for the majority of the emissions. Generally, plants engaged in chemical fibers production or situated in eastern China pose a greater risk to public health due to their higher formation potentials of O3 and SOA or their proximity to residential areas or both. We demonstrated that targeting these high-risk plants for emission reduction could enhance health benefits by 7-37% per unit of emission reduction on average compared to the current situation. Consequently, this study provides essential insights for developing effective plant-specific NMVOC control strategies within China's chemical industry.

Costs and Benefits of Household Fuel Policies and Alternative Strategies in the Jing-Jin-Ji Region.

Air pollution is still one of the most severe problems in northern China, especially in the Jing-Jin-Ji region around Beijing. In recent years, China has implemented many stringent policies to address the air quality issue, including promoting energy transition toward cleaner fuels in residential sectors. But until 2020, even in the Jing-Jin-Ji region, nearly half of the rural households still use solid fuels for heating. For residents who are not covered by the clean heating campaign, we analyze five potential mitigation strategies and evaluate their environmental effects as well as the associated health benefits and costs. We estimate that substitution with electricity or gas would reduce air pollution and premature mortality more strongly, while the relatively low investment costs of implementing clean coal or biomass pellet lead to a larger benefit-cost ratio, indicating higher cost efficiency. Hence, clean coal or biomass pellet could be transitional substitution options for the less developed or remote areas which cannot afford a total transition toward electricity or natural gas in the short term.

Projecting future carbon emissions from cement production in developing countries.

Achieving low-carbon development of the cement industry in the developing countries is fundamental to global emissions abatement, considering the local construction industry's rapid growth. However, there is currently a lack of systematic and accurate accounting and projection of cement emissions in developing countries, which are characterized with lower basic economic country condition. Here, we provide bottom-up quantifications of emissions from global cement production and reveal a regional shift in the main contributors to global cement CO2 emissions. The study further explores cement emissions over 2020-2050 that correspond to different housing and infrastructure conditions and emissions mitigation options for all developing countries except China. We find that cement emissions in developing countries except China will reach 1.4-3.8 Gt in 2050 (depending on different industrialization trajectories), compared to their annual emissions of 0.7 Gt in 2018. The optimal combination of low-carbon measures could contribute to reducing annual emissions by around 65% in 2050 and cumulative emissions by around 48% over 2020-2050. The efficient technological paths towards a low carbon future of cement industry vary among the countries and infrastructure scenarios. Our results are essential to understanding future emissions patterns of the cement industry in the developing countries and can inform policies in the cement sector that contribute to meeting the climate targets set out in the Paris Agreement.

Wintertime Formation of Large Sulfate Particles in China and Implications for Human Health.

Outdoor air pollution causes millions of premature deaths annually worldwide. Sulfate is a major component of particulate pollution. Winter sulfate observations in China show both high concentrations and an accumulation mode with a modal size >1 µm. However, we find that this observed size distribution cannot be simulated using classical gaseous and aqueous phase formation (CSF) or proposed aerosol-processing formation (APF) mechanisms. Specifically, the CSF simulation underestimates sulfate concentrations by 76% over megacities in China and predicts particle size distributions with a modal size of ∼0.35 µm, significantly smaller than observations. Although incorporating the APF mechanism in the atmospheric chemical model notably improves sulfate concentration simulation with reasonable parameters, the simulated sulfate particle size distribution remains similar to that using the CSF mechanism. We further conduct theoretical analyses and show that particles with diameters <0.3 µm grow rapidly (2-3 s) to 1 µm through the condensation of sulfuric acid in fresh high-temperature exhaust plumes, referred to as in-source formation (ISF). An ISF sulfate source equivalent to 15% of sulfur emissions from fossil fuel combustion largely explains both observed size distributions and mass concentrations of sulfate particles. The findings imply that ISF is a major source of wintertime micron-sized sulfate in China and underscore the importance of considering the size distribution of aerosols for accurately assessing the impacts of inorganic aerosols on radiative forcing and human health.

Dissecting the contributions of organic nitrogen aerosols to global atmospheric nitrogen deposition and implications for ecosystems.

Atmospheric deposition of particulate organic nitrogen (ONp) is a significant process in the global nitrogen cycle and may be pivotally important for N-limited ecosystems. However, past models largely overlooked the spatial and chemical inhomogeneity of atmospheric ONp and were thus deficient in assessing global ONp impacts. We constructed a comprehensive global model of atmospheric gaseous and particulate organic nitrogen (ON), including the latest knowledge on emissions and secondary formations. Using this model, we simulated global atmospheric ONp abundances consistent with observations. Our estimated global atmospheric ON deposition was 26 Tg N yr-1, predominantly in the form of ONp (23 Tg N yr-1) and mostly from wildfires (37%), oceans (22%) and aqueous productions (17%). Globally, ONp contributed as much as 40% to 80% of the total N deposition downwind of biomass-burning regions. Atmospheric ONp deposition thus constituted the dominant external N supply to the N-limited boreal forests, tundras and the Arctic Ocean, and its importance may be amplified in a future warming climate.

Iron and Steel Industry Emissions: A Global Analysis of Trends and Drivers.

The iron and steel industry (ISI) is important for socio-economic progress but emits greenhouse gases and air pollutants detrimental to climate and human health. Understanding its historical emission trends and drivers is crucial for future warming and pollution interventions. Here, we offer an exhaustive analysis of global ISI emissions over the past 60 years, forecasting up to 2050. We evaluate emissions of carbon dioxide and conventional and unconventional air pollutants, including heavy metals and polychlorinated dibenzodioxins and dibenzofurans. Based on this newly established inventory, we dissect the determinants of past emission trends and future trajectories. Results show varied trends for different pollutants. Specifically, PM2.5 emissions decreased consistently during the period 1970 to 2000, attributed to adoption of advanced production technologies. Conversely, NOx and SO2 began declining recently due to stringent controls in major contributors such as China, a trend expected to persist. Currently, end-of-pipe abatement technologies are key to PM2.5 reduction, whereas process modifications are central to CO2 mitigation. Projections suggest that by 2050, developing nations (excluding China) will contribute 52-54% of global ISI PM2.5 emissions, a rise from 29% in 2019. Long-term emission curtailment will necessitate the innovation and widespread adoption of new production and abatement technologies in emerging economies worldwide.

Emission factors of oxygenated polycyclic aromatic hydrocarbons from ships in China.

The rapid growth of maritime traffic, transportation, and fishery activities has increased shipping emissions and degraded the air quality in coastal areas. As a result, controlling ocean-based pollution sources have become increasingly important. This study investigated the real-world emission characteristics of oxygenated polycyclic aromatic hydrocarbons (OPAHs, a group of highly toxic semi-volatile organic compounds) from five types of offshore ships using diesel oil: small and medium fishing ships, tug boats, ferry, and engineering ships, under various driving mode. Both gaseous and particle emission factors (EF) of four specific OPAHs were determined in our study. Among the OPAHs species emitted from ships, 9-fluorenone (9FO; 72%) and anthrathrace-9,10-quinone (ATQ; 25%) were the most abundant. The arithmetic mean of the sum of gaseous OPAHs EFs for all ships in this study was 2.5 ± 4.4 mg/kg fuel burned, and the mean particulate OPAHs EF was 4.7 ± 7.9 mg/kg. Small fishing ships had the highest total OPAHs EFs (31.0 ± 17.0 mg/kg). Apart from small fishing ships, there was no significant difference in the total EF of OPAHs for the other four types of ships. The emissions of the four OPAHs are predominantly in the particulate phase. There were no significant differences in the emissions of the four OPAHs under different driving mode. According to estimates, the annual OPAH emissions from the four types of ships in Hainan in 2017 were approximately 4.2 (range: 2.7-7.0) tons, dwarfing the OPAH emissions from diesel-powered on-road vehicles in China (23.5 kg).